When production cannot afford pauses between batches, a Continuous Fluidized Bed Dryer becomes the practical solution. Rather than loading and loading material in cycles, this system keeps material moving steadily from inlet to outlet, drying it along the way without stopping the process.
Bed Dimensions (W×L): 0.3–2.0 m (Width) × 3–15 m (Length)
Processing Capacity: 50 – 5,000 kg/h
Initial Moisture Content: 10% – 60% (wet basis)
Final Moisture Content: 0.1% – 5% (wet basis)
Inlet Air Temperature: 60 – 220 °C
Outlet Air Temperature: 40 – 90 °C
Air Volume: 1,000 – 20,000 m³/h
Bed Plate Type: Perforated plate / Sieve plate / Slotted plate
Bed Plate Material: SUS304 / SUS316L / Carbon steel
Vibration Type: Vibration motor driven (horizontal & vertical vibration)
Vibration Frequency: 50 Hz / 60 Hz
Vibration Amplitude: 2 – 6 mm
Vibration Motor Power: 0.75 – 7.5 kW
Fan Motor Power: 3 – 45 kW
Heating Method: Steam / Electric / Gas / Thermal oil
Total Installed Power: 5 – 80 kW
Working Pressure: Normal pressure (slight negative pressure)
Material of Main Body: SUS304 / SUS316L / Carbon steel
Sealing: Silicone / Fluorine rubber
Dust Removal: Cyclone separator + Bag filter
Control System: Manual / PLC automatic control
Ambient Temperature: -5 – 40 °C
Relative Humidity: ≤ 85% (non-condensing)
Noise Level: ≤ 75 dB(A)
Application Materials: Granular, crystalline, pellet, powder materials
