Made in China
Digital Logic Circuits Experimental System China Engineering Lab Training System Suppliers
It is designed for the requirements of digital pulse circuit experiment, digital logic circuit experiment and curriculum project.
It is made of PCB and all the connections are accomplished on the backside of the board while the symbols and diagrams specific to each module are clearly silk-screened on the faceplates. DIP IC sockets and sockets for components connection are provided. Four blue sockets for fixing the experimental modules and a breadboard are provided.
Two-way ±5V@0.5A and two-way ±15V@0.5A, with the function of short-circuit protection and auto-recovery for each circuit.
It outputs base frequency, divide-by-2, divide-by-4 and divide-by-8 of BCD code and the output for the base frequency are: 1Hz, 1kHz, 20kHz.
One-way continuous adjustable counter pulse: 0.5Hz~300kHz
Positive & negative single pulse source
Five-state logic test pen is designed by the logical program device and with different colors of LED for output indication.16-bit logic switches and 16-bit level indication, 6-digit hex seven-segment decoder display, 4 thumbwheel switches (up/down decimal counter).
Multi-function intelligent tester is MCU-based and available to identify the types of TTL, CMOS ICs and available as a frequency meter (range: 1Hz~1MHz).
It is available to used as a period counter and pulse No. counter etc.
Components: Pushbuttons, relay, multi-turn potentiometer (10KΩ) and carbon-film potentiometer (100KΩ) etc. are installed on the panel.
Transistor switch characteristic, limiter and clamp
Characteristics and parameter test of TTL
Characteristics and parameter test of CMOS
Connection and drive of integrated logic circuit
Design and test of combinational logic circuit
Decoder & its application
Data selector & its application
Flip-flop & its application
Counter & its application
Shift register & its application
Pulse distributor & its application
Pulse signal generation using digital gates-Self-excited multivibrator
Monostable flip-flop & Schmitt flip-flop-Pulse delay & waveform shaping circuit
555 time base circuit & its application
D/A, A/D converter
First responser--synthetic experiment
Electrical stopwatch--synthetic experiment
3 -digit DC digital voltmeter--synthetic experiment
Digital frequency meter--synthetic experiment
Tug-of-war--synthetic experiment
RAM 2114A & its application-synthetic experiment
|
DC stabilized power supply |
±5V@0.5A, ±15V@0.5A, the function of short-circuit protection and auto-recovery is provided. |
|
Pulse signal source |
It outputs base frequency, divide-by-2, divide-by-4 and divide-by-8 of BCD code and the output for the base frequency are: 1Hz, 1kHz, 20kHz. One-way continuous adjustable counter pulse: 0.5Hz~300kHz Positive & negative single pulse source |
|
3 and 1/2 digit digital multimeter |
1. DC voltage: 200mV/2V/20V/200V/1000V ±(0.5%+3) 2. AC voltage: 2V/20V/200V/750V ±(0.8%+5) 3. DC current:20uA/2mA/200mA/20A ±(1.5%+3) 4. AC current: 2mA/20mA/20A ±(1.5%+5) 5. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ ±(0.8%+5) 6. Conductance: (0.1-100)nS ±(1.0%+30) 7. Capacitance: 20nF/200nF/20uF/200uF ±(4.0%+10) 8. Frequency: 20kHz ±(1.5%+25) temperature: -40oC-1000oC ±(0.75%+3) 9. Special function: diode test, triode test, on/off alarm, low-voltage display, data hold, self-turning off, functional protection, self-recovery insurance, shockproof, 10MΩ input impedance, 3 times/s sample rate, 40-400Hz AC frequency response, manual operation and the maximum display is 1999. |
As leading digital logic circuits experimental system manufacturers, suppliers & exporters in China, Engineering Lab China combines factory-direct pricing, strict quality control and reliable worldwide shipping. Every Digital Logic Circuits Experimental System is built in-house in Guangzhou City to deliver dependable performance for engineering training and teaching environments.
We manufacture every Digital Logic Circuits Experimental System at our own facility in Guangzhou, China. No middlemen — you get factory pricing on Engineering Laboratory Trainer Kits, Training Charts and Educational Equipment.
Every Digital Logic Circuits Experimental System passes a strict outward quality check before dispatch, so it stands up to daily use in Industrial Training Institutions, Engineering Colleges & Polytechnics.
From a single trainer kit to a full lab tender, our team manages packaging and prompt international delivery so your Digital Logic Circuits Experimental System arrives on schedule, anywhere in the world.
EngineeringLabChina is a leading digital logic circuits experimental system manufacturers, digital logic circuits experimental system suppliers & exporters in China. Whether you need a single unit for a lab refresh or a complete tender for a polytechnic, we handle Engineering, Procurement, Installation and Commissioning under one roof.
We accept Wire or Telegraphic Transfer / Letter of Credit. Shipping is based on consignment size — contact us with your requirement for an accurate quote.
Share quantity, destination country and any custom specs for the Digital Logic Circuits Experimental System.
Our team replies with factory pricing, lead time and shipping options within 24 hours.
We manufacture in Guangzhou, run a quality check and prepare export-ready packaging.
Consignment dispatched by your preferred mode — sea, air or courier — to your door.
Full product category index — manufactured in Guangzhou, exported worldwide.
