Hydraulic Actuator for Cyclic Loading

Cyclic Cum Static Triaxial Test System - Hydraulic Actuator for Cyclic Loading

Actuator is a linear motion device, which gives a controlled motion either on stress basis or strain basis. It is a precision piece of equipment which follows the command from the
wave generator through the servo valve. It is an equal area ram and piston with surface finish of 0.2 microns. End plates have metallic seals for side thrust. Servo valve is fixed to the actuator. These valves are high performance two stage valves with a pressure drop of @70 bars.

Technical Specifications:-
Type : Double Acting
Capacity : ±10kN
Stroke length : ± 50mm
Frequency range : 0.01Hz-10Hz
Displacement transducer : ±50mm
Operating Pressure : 100 kg/cm2
Servo Valve 2 stage : 20LPM