Made in China
Reverse Osmosis Water Purification System for Water Testing Lab
The water purification system is advanced, mature, stable effluent quality and stable system operation is recommended as the main desalination equipment; the system with low operation cost and easy to realize automation. The reverse osmosis water treatment system is very economical.
Technical requirements
System Water output: 0.5 m3/h @25?, the equipment desalting rate is 98-99%, and the total system recovery rate is 50%.
Total water intake of the system: 1 m3/h, (Raw water conductivity 800 s/cm, turbidity 5NTU, water temperature 4-40 ?, BOD 10, COD 15) (if the Raw water index is greater than the above data scheme should be negotiated separately).
Operation mode: the system is fully operated (it can also be set to the manual operation function).
Original conditions
Design temperature: room temperature state.
Design boundary line: specified by the customer.
Raw water source: underground water.
Analysis of Raw water quality: no detailed water quality report
System requirements
Consumables: The consumables used in the system commissioning process shall be provided by us. After the system acceptance and delivery, the consumables shall be purchased by the user before we can provide technical support.
Equipment room 6m2 (source water tank 300L and 500 pure water tank 500L, the size of the water tank can be adjusted according to the needs).
Inlet pipe: the Raw water inlet pipe is sent to the designated position in the pure water production room. DN20 inner wire interface is recommended reserved for the size of the inlet pipe and DN15 inner wire interface at the inlet of the pure water tank.
Supply cable: According to the system capacity, the part exceeding 3 meters shall be responsible.
Equipment power demand: 380V / 220V~50Hz, and the total power of the equipment is 1.5KW.
Water Purification System
Desalination treatment is required for raw water. The reverse osmosis water treatment system has good economic efficiency. To ensure the long-term reliable operation of key reverse osmosis equipment, a pre-treatment system must be installed to meet the inlet water indicators of reverse osmosis membrane (RO): turbidity<0.5NTU, SDI<4, and residual chlorine<0.1ppm. According to the raw water quality, the pretreatment system consists of a multi-medium filter, an activated carbon filter, a softening filter, a safety filter, and related auxiliary equipment. It is recommended to use an advanced, mature, stable effluent quality, and stable system operation single-stage reverse osmosis desalination device as the main desalination equipment for this project; The system has low operating costs and is easy to achieve automation.
As leading reverse osmosis water purification system for water testing lab manufacturers, suppliers & exporters in China, Engineering Lab China combines factory-direct pricing, strict quality control and reliable worldwide shipping. Every Reverse Osmosis Water Purification System for Water Testing Lab is built in-house in Guangzhou City to deliver dependable performance for engineering training and teaching environments.
We manufacture every Reverse Osmosis Water Purification System for Water Testing Lab at our own facility in Guangzhou, China. No middlemen — you get factory pricing on Engineering Laboratory Trainer Kits, Training Charts and Educational Equipment.
Every Reverse Osmosis Water Purification System for Water Testing Lab passes a strict outward quality check before dispatch, so it stands up to daily use in Industrial Training Institutions, Engineering Colleges & Polytechnics.
From a single trainer kit to a full lab tender, our team manages packaging and prompt international delivery so your Reverse Osmosis Water Purification System for Water Testing Lab arrives on schedule, anywhere in the world.
EngineeringLabChina is a leading reverse osmosis water purification system for water testing lab manufacturers, reverse osmosis water purification system for water testing lab suppliers & exporters in China. Whether you need a single unit for a lab refresh or a complete tender for a polytechnic, we handle Engineering, Procurement, Installation and Commissioning under one roof.
We accept Wire or Telegraphic Transfer / Letter of Credit. Shipping is based on consignment size — contact us with your requirement for an accurate quote.
Share quantity, destination country and any custom specs for the Reverse Osmosis Water Purification System for Water Testing Lab.
Our team replies with factory pricing, lead time and shipping options within 24 hours.
We manufacture in Guangzhou, run a quality check and prepare export-ready packaging.
Consignment dispatched by your preferred mode — sea, air or courier — to your door.
Full product category index — manufactured in Guangzhou, exported worldwide.
