Made in China
Tilting Flume with comprehensive instruction manual.
Excellent for use in a wide range of Fluid Mechanics laboratory industrial procedures. It's the ideal tool for use in an Fluid Mechanics Laboratory workshop and engineering lab.
The small open channel flume, available in 2.5m or 5.0m lengths, with clear acrylic sides to the working section for total visibility of the flow.
The channel is fitted with a PVC inlet tank, and is designed for free discharge into the Hydraulics Bench.
The flume is mounted on a rigid framework, and can be tilted by use of a calibrated screw jack, which allows accurate slope adjustment of the channel.
The inlet tank incorporates a stilling arrangement to diffuse the water flow prior to entry into the channel, ensuring smooth uniform flow.
The level in the working section of the flume is controlled using an overshot weir at the discharge end.
Bed pressure tappings and fixing points for models are provided.
A longitudinal scale positioned at the top of the channel allows depth gauges and Pitot-static tubes to be accurately positioned along the channel length.
Also available is an optional flow meter, which can be fitted to allow direct, flow measurements to be taken.
Study of open channel flume
Applying and understanding Manning’s formula
Use of hook and point gauges to measure water level
Use of a Pitot-static tube to measure flow rate and velocity profiles
Understanding the relationship between water level above the crest of a weir and flow rate over the weir
Using hydraulic structures to control level, eg syphon spillways
Understanding sub-and super-critical flow and the underlying characteristics of waves
Hydraulic jump
Using hydraulic structures for control of flow eg sluice gate
A 76mm wide, 250mm high open channel for use with an Hydraulics Bench.
Clear acrylic sides to give visibility of the working section.
A jacking system permits the slope of the channel bed to be adjusted between -1% and +3%.
Inlet tank with flow stilling arrangement.
Available in 2.5m and 5.0m working section lengths.
Includes a Venturi, sharp and broad-crested weirs, 2 vernier level gauges, adjustable undershot weir and crump weir.
Wide range of other models available as accessories.
Optional flow meter.
As leading tilting flume manufacturers, suppliers & exporters in China, Engineering Lab China combines factory-direct pricing, strict quality control and reliable worldwide shipping. Every Tilting Flume is built in-house in Guangzhou City to deliver dependable performance for engineering training and teaching environments.
We manufacture every Tilting Flume at our own facility in Guangzhou, China. No middlemen — you get factory pricing on Engineering Laboratory Trainer Kits, Training Charts and Educational Equipment.
Every Tilting Flume passes a strict outward quality check before dispatch, so it stands up to daily use in Industrial Training Institutions, Engineering Colleges & Polytechnics.
From a single trainer kit to a full lab tender, our team manages packaging and prompt international delivery so your Tilting Flume arrives on schedule, anywhere in the world.
EngineeringLabChina is a leading tilting flume manufacturers, tilting flume suppliers & exporters in China. Whether you need a single unit for a lab refresh or a complete tender for a polytechnic, we handle Engineering, Procurement, Installation and Commissioning under one roof.
We accept Wire or Telegraphic Transfer / Letter of Credit. Shipping is based on consignment size — contact us with your requirement for an accurate quote.
Share quantity, destination country and any custom specs for the Tilting Flume.
Our team replies with factory pricing, lead time and shipping options within 24 hours.
We manufacture in Guangzhou, run a quality check and prepare export-ready packaging.
Consignment dispatched by your preferred mode — sea, air or courier — to your door.
Full product category index — manufactured in Guangzhou, exported worldwide.
