Product Code: CHINAVLABM10120001
Categories: Esclerometer for Concrete Test Smidt Hammers
Esclerometer for Concrete Test Smidt Hammer China Engineering Lab Training System Suppliers
The meter is in accordance with technical regulation of used for testing of concrete compressive strength within the scope of 10-60Mpa, with the system standard energy of 2.207J, and value indicating system of pointer direct reading. Light (saving 2/3 forces compared with counterpart products), flexible, inexpensive, power-free, easy to master; the button applies stretching technical and is not easy to fall off; the pointer is easy to adjust friction. Therefore, it is the first choice applicable for on-the-spot NDT.
|
Length of pointer |
20.0±0.2(mm) |
|
Friction of pointer |
0.65±0.15(N) S |
|
Sphere semi-diameter at the end of the flip rod |
25±1.0(mm) |
|
Rigidity of flip tensioned spring |
785.0±40.0(N/m) |
|
Location of flip hammer's hook release |
|
|
at the scale mark Work length of flip tensioned spring |
61.5.0±0.3(mm) |
|
Strike length of flip hammer |
75±0.3 |
|
Hop location of the flip hammer |
|
|
at the graduated scale Fixed value of steel anvil |
80±2 (our products are controlled between 80-81 |
Similar items like Esclerometer for Concrete Test Smidt Hammer you may view
