Hot Air Oven-Digital with Forced Air Circulation 250°C

Hot Air Oven-Digital with Forced Air Circulation - 250°C - S.S. Chamber 100 X 100 X 100

Double walled, inner chamber S.S.304, Outer CRC powder coated , 65 mm thick glass wool insulation , 80/20 nichrome heating elements placed under ribs at bottom and sides for uniform heat distribution Temp. Range. 50?C to 250?C , Auto tune Dual Display Digital, forced air circulation, Working on 230 Volts AC Single Phase.

Salient Features :
Internal circuit wiring as per CE Norms
65mm high density Glass wool insulation on all sides to offer minimum chamber heat loss
Oven is fitted with heating elements on all three sides, ensuring uniform temperature distribution throughout the working chamber
Sealed and enclosed heaters to working chamber for minimum heat  loss
80/20 nichrome heating elements, ensuring long lasting and continuous heating within the chamber
Special heavy duty Stainless steel lock and door hinges with spring and roller mechanism
Stainless steel crimped wire mesh Shelves to withstand heavy load and to offer minimum resistance to air circulation for better heat  distribution
Provision to add more shelves, as per requirement of test - Adjustable Shelves to place test samples or Glass wares of varying  dimensions
Adjustable air ventilation mounted at top
Operation on 220/230 Volt, 50 Hz, Single phase, AC Supply
With built-in forced air circulation arrangement for uniform heat distribution inside the working chamber
Complete with pilot indicating lamps, 2 meter cord wire and power plug.

Working size: 100 x 100 x 100 cm ( H x W x D)
Chamber volume: 1000 ltr.
No of trays: 03 Numbers
Rating: 2.5 KW
Outer Chamber: CRC - powder coated
Inner chamber: Made of Stainless Steel S.S. 304 mirror polished material.
Temperature Range: 50 °C to 250 °C
Exterior body: Made of mild steel material, which is powder coated in attractive shades
Insulation: 65mm high density Glass wool insulation on all sides to offer minimum chamber heat loss
Heating element    Oven is fitted with heating elements on all three sides, ensuring uniform temperature distribution throughout the working chamber
Heater: Sealed and enclosed heaters to working chamber for minimum heat loss
Temperature Control: Microprocessor based Auto tune PID Digital temperature indicator cum controller
Heating element: 80/20 nichrome heating elements, ensuring long lasting and continuous heating within the chamber
Control Accuracy: ± 1°C or better
Door lock: Special heavy duty Stainless steel lock and door hinges with spring and roller mechanism
Shelves: S.S. crimped wire mesh Shelves to withstand heavy load and to offer minimum resistance to air circulation for better heat distribution
Other provisions: Provision to add more shelves, as per requirement of test Adjustable Shelves to place test samples or Glass ares of varying dimensions
Air ventilation: Adjustable air ventilation mounted at top
Forced Air circulation: With built in forced air circulation arrangement for uniform heat distribution inside the working chamber
Complete with: Complete with pilot indicating lamps, 2 meter cord wire and power plug.
Operation on: 220/230 Volt, 50 Hz, Single phase, AC Supply