Made in China
Motor Control Circuit Training Equipment China Engineering Lab Training System Suppliers
This equipment is used for training, operating and examining, with rational distribution of the distribution box and component with reliable quality. It can be used for training of factory electrical control and motor drive, etc.
Power supply: 3-phase 4-wire and power is controlled by on/off buttons, with leakage protection. Also, emergency button is available.
A analog AC voltmeter (0~450V) is used for grid voltage measurement and a AC ammeter (0~5A) is used for load current measurement.
Modular for easy operating.
All the components, such as switch, ganged switch, sing/three-phase watt meter, fluorescent lamp, etc. are connected to the terminal blocks for easy and technical connection to avoid damage.
Tools: wire stripper, sharp nose pliers, diagonal cutting pliers, phillips screwdriver, slotted screwdriver etc.
Lab exercises:
Direct start of three-phase asynchronous motor
Jog control of three-phase asynchronous motor
Control at two locations of three-phase asynchronous motor
Forward and reverse rotation control of interlock of contactor
Forward and reverse rotation control of dual interlock
Manual sequential control of three-phase asynchronous motor
Auto sequential control of three-phase asynchronous motor
start auto control circuit
Energy-consuming brake circuit
Reverse brake control circuit
Work-table control circuit
Forward and reverse rotation jog control of three phase asynchronous motor
Auto to-and-fro control with jog
Contactor self-lock control of three phase asynchronous motor
Jog control in signal direction of three phase asynchronous motor
Series resistor reduced voltage starting of 3-phase asynchronous motor
Double speed motor controlled by contactor
Double speed motor controlled by time relay
Electrical control of C620
Electrical control of electric hoist
Control of gear-hobbing
Series resistance secondary starting control of shunt DC motor
Forward and reverse rotation control of shunt DC motor
Armature loop series resistance speed regulating of shunt DC motor
Excitation speed regulation of shunt DC motor
|
digit multimeter |
1. DC voltage: 200mV/2V/20V/200V/1000V ±(0.5%+3) 2. AC voltage: 2V/20V/200V/750V ±(0.8%+5) 3. DC current: 20uA/2mA/200mA/20A ±(1.5%+3) 4. AC current: 2mA/20mA/20A ±(1.5%+5) 5. Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ ±(0.8%+5) 6. Conductance: (0.1-100)nS ±(1.0%+30) 7. Capacitance: 20nF/200nF/20uF/200uF ±(4.0%+10) 8. Frequency meter: 20kHz ±(1.5%+25) Celsius temperature: -40oC-1000oC ±(0.75%+3) 9. Special function: diode test, transistor test, ON/OFF alarm, low-voltage display, data hold, turn off the power automatically etc. Input impedance: 10MΩ, sampling rate: 3 times/s, AC frequency response: 40-400Hz, operation mode: manual. Maximum range: 1999. |
|
3-phase Squirrel-cage Asynchronous Motor |
380V/Y (speed relay is available for reversing braking) |
|
phase Squirrel-cage Asynchronous Motor |
380V/Δ |
|
Double-speed 3-phase Asynchronous Motor |
380V/Δ/YY |
|
Shunt Motor |
DC220V |
|
CONFIGURATIONS:(as per one set) |
|
|
-digit multimeter: 1 |
Provided |
|
phase Squirrel-cage Asynchronous Motor |
Provided |
|
phase Squirrel-cage Asynchronous Motor |
Provided |
|
Double-speed 3-phase Asynchronous Motor |
Provided |
|
Shunt Motor |
Provided |
|
Accessory and connecting wires: 1set |
Provided |
|
Operating instructions and laboratory manual: 1set |
Provided |
As leading motor control circuit training equipment manufacturers, suppliers & exporters in China, Engineering Lab China combines factory-direct pricing, strict quality control and reliable worldwide shipping. Every Motor Control Circuit Training Equipment is built in-house in Guangzhou City to deliver dependable performance for engineering training and teaching environments.
We manufacture every Motor Control Circuit Training Equipment at our own facility in Guangzhou, China. No middlemen — you get factory pricing on Engineering Laboratory Trainer Kits, Training Charts and Educational Equipment.
Every Motor Control Circuit Training Equipment passes a strict outward quality check before dispatch, so it stands up to daily use in Industrial Training Institutions, Engineering Colleges & Polytechnics.
From a single trainer kit to a full lab tender, our team manages packaging and prompt international delivery so your Motor Control Circuit Training Equipment arrives on schedule, anywhere in the world.
EngineeringLabChina is a leading motor control circuit training equipment manufacturers, motor control circuit training equipment suppliers & exporters in China. Whether you need a single unit for a lab refresh or a complete tender for a polytechnic, we handle Engineering, Procurement, Installation and Commissioning under one roof.
We accept Wire or Telegraphic Transfer / Letter of Credit. Shipping is based on consignment size — contact us with your requirement for an accurate quote.
Share quantity, destination country and any custom specs for the Motor Control Circuit Training Equipment.
Our team replies with factory pricing, lead time and shipping options within 24 hours.
We manufacture in Guangzhou, run a quality check and prepare export-ready packaging.
Consignment dispatched by your preferred mode — sea, air or courier — to your door.
Full product category index — manufactured in Guangzhou, exported worldwide.
